Video Description
Learn the key considerations for installing soffit panels beneath a gable extension in a Worldwide Steel Buildings project. The panels close the underside of the gable overhang and complete the visible finish beneath the roof projection. The video emphasizes working along the roof slope, fitting panels into the trim, and keeping the finished surface uniform so builders can approach the work with a clearer understanding of the component and its place in the finished structure.
What You'll Learn
- How to fit soffit panels beneath a sloped overhang
- How to work the panels into the receiving trim
- How to maintain a uniform finished surface
Video Transcript
Now that your gable extension J-Trim is installed, it’s time to install your end wall gable extension soffits.
Your gable extension soffit panels will come pre-cut to your building and will slide into the J-Trim before being secured to the bottom leg of your gable track with screws.
You’ll need to identify the soffit panels that are supposed to be installed for the extension you’re working on.
Refer to the sheet metal trim package list located in your ship list. This page will indicate what panels and lengths are to be used at each surface of your building.
In our example, our panels are labeled, “At gable extensions.”
Slide your 1st soffit panel into place. Since our building has a bird box present, we slide the first panel into the J-Trim along the bird box.
Once in place, secure with painted sheet metal screws into the bottom leg of your gable track at each high rib.
When installing your 2nd soffit panel, overlap the first panel as demonstrated here.
In our example, we are installing our panels from the left side and working to the right. Therefore, the overlap edge of our soffit panels will be positioned on the left side when installing.
If you elect to install from right to left, then your overlap edge will be positioned on the right side.
Each panel will need to be secured at the first high rib and the middle high rib before adding the next panel.
When you reach the peak of the building, the soffit panel in the center may need to bend to follow the J-Trim on both sides of the peak.
Continue installing soffit panels along the length of your gable extension.
Once all soffit panels have been installed, you are ready to install your gable post trim.
Got a Question?
Soffit J-Trim Installation at Gable Extension
Post Trim Installation at Gable Extension